High Load Low Speed Thrust Ball Bearing Axial Load Easy Installation
1. Product Description
High Load Low Speed Thrust Ball Bearing Axial Load Easy Installation is composed of three parts: seat ring, shaft ring and steel ball cage.The shaft with the shaft ring, and the housing ring.Because the ring is cushion shape, the thrust ball bearing is divided into two types: flat base cushion type and centering spherical cushion type.In addition, the bearing can bear the axial load, but not the radial load.The mounting surface of the seat ring is spherical bearing, which has the function of adjusting the center, and can reduce the influence of the installation & the limit speed is low.
2. Specification
| Basic material |
GCr15 |
Dynanic load |
160N/mm² |
| Base hardness |
HRC>58 |
Friction Coef |
<0.16 |
| Temperature Max |
300℃ |
Speed limit |
dry 0.3m/s oil 6m/s |
3. Application
High Load Low Speed Thrust Ball Bearing Axial Load Easy Installation are widely applied in automotive,machine tool,crane,vertical water pump,jack, low speed reducer etc.
4. Advantages
The thrust ball bearing are Used for bearing one side axial load, low speed on the machine,Unidirectional thrust ball bearing can only bear the load of one direction, if bear the load of two directions, must choose bidirectional thrust ball bearing.Thrust ball bearings must be subjected to a minimum or preload.When the shaft is perpendicular, the weight of the shaft usually exceeds the minimum load.At this time, the axial load in the opposite direction may be reduced.It with long operating life.
Product Tags:
|
|
Low Speed Thrust Ball Bearing High Precision , Easy Installation Axial Load Bearing Images
|
