DIN Standard Flat & Spring Thrust Washer Gasket Steel For Export With Low Cost
1. Product Description
DIN Standard Flat & Spring Thrust Washer Gasket Steel For Export With Low Cost basd on carbon steel or stainless steel. It is mainly stamped out with iron plate or stainless plate,it is mainly used to reduce the pressure, when some parts of the tightening axial force is large, easy to make the washer into a disc, then can be used to change the material and improve the hardness to solve.For reducing friction, preventing leakage, isolating, preventing loosening or dispersing pressure.
2. Specification
| oad capacity |
Static load |
250N/mm2 |
PVvalue limit |
Oil lubrication |
40N/mm2.m/s |
| Dymamic load |
140N/mm2 |
Dry friction |
2.8N/mm2.m/s |
| Oscillating |
60N/mm2 |
Friction coef μ |
0.08~0.50 |
| Speed limit |
Oil lubrication |
5m/s |
Working temperature |
-190℃~+300℃ |
| Dry friction |
2.5m/s |
Thermal conductivity |
42W/mk |
| Coefficient of linear expansion |
11x
10-6/k
|
|
3. Application
DIN Standard Flat & Spring Thrust Washer Gasket Steel For Export With Low Cost are widely used in auto industry,building industry,means of transportation etc.
4. Advantages
This type thrust washer Increase the contact area between screw and machine.To eliminate damage to the surface of the machine caused by the spring pad when removing screws.Use must be a spring pad a flat pad, the flat pad next to the machine surface, the spring pad between the flat pad and the nut. With good surface gloss ,good resilience, excellent sealing effect ,excellent weather resistance & good material stability.
Product Tags:
|
|
DIN Standard Thrust Washer Bearing Flat / Spring Type High Mechanical Strength Images
|
